• October 6, 2022

Do Carbon Saddle Rails Make A Difference?

Do carbon saddle rails make a difference? There is no difference in any of them and the comfort is gained from the flex in the saddle shell/base not the rails, the shell and padding is identical on all three versions.

How do you put a saddle on a carbon seatpost?

How do I stop my carbon seatpost from slipping?

Are carbon saddles comfortable?

the really light ones are very comfortable as the carbon shell flexes a lot more than regular saddles which makes for good comfort. that's true for saddles like AX-Lightness or the newer Tune Concorde etc. however stay clear of heavier carbon saddles as those usually are bonehard and don't flex at all.

Are carbon saddle rails worth it?

The key takeaway is this: Carbon is the lightest and stiffest, which means it's a great option for riders who already know what they want out of a saddle. Other materials are woven into the fibers to prevent catastrophic failure in the event the carbon does crack.


Related advise for Do Carbon Saddle Rails Make A Difference?


Are all saddle rails the same?

Typically, there will be two rails but sometimes you can find saddles with one, three, or four rails. It's also sometimes called saddle rail spacing or saddle base width. In either case, they all measure the same thing, the distance between the two rails. The standard saddle rail width is 44mm.


Can you clamp a carbon seatpost?

You can hold the bike by the carbon post if it's round and you clamp it gently, but you may scratch it unless you're very careful and the jaws of the repair stand clamp are safe (keep them clean of dirt and wrap a piece of wax paper around the seatpost to help prevent scratches).


Can I use an alloy seatpost in a carbon frame?

Grease will work just fine unless the post slips, then you need the carbon assembly paste.


Are carbon fiber seatposts worth it?

By having a set spring rate, a heavier rider will enjoy a more comfortable ride, while a lighter rider will feel more vibration and big hits. Carbon seatposts also perform much better with more exposed seatpost (2x more flex), which hands the better performance to taller riders.


How do you tighten a carbon seat post?


Do you grease a carbon seatpost?


Where should sit bones be on saddle?

The optimal saddle width guarantees that the sit bones lie completely flat on the saddle. This is the only way in which pressure is relieved on the sensitive area in men and on the pubic arch in women and ensures more efficiency. A saddle should fit like a pair of shoes!


Which horse saddle is best?

The 8 Best Horse Saddles – Reviews 2021

  • Manaal Enterprises Premium Western Leather Saddle – Best Western Saddle.
  • Acerugs Premium Black Leather English Saddle – Best English Saddle.
  • M-Royal Mini Horse Saddle – Best Mini Horse Saddle.
  • Manaal Enterprises Synthetic Western Saddle.
  • Acerugs Western Pleasure Trail Horse Saddle.

  • What is saddle clamp?

    Pipe clamps - often referred to as pipe clips or sometimes saddle clamps are relatively simple fittings widely used in many DIY/installation settings. They're one of the various types of channel support system, most commonly found in plumbing, heating, drainage and electrical work.


    Is a bicycle seat called a saddle?

    A bicycle saddle, often called a bicycle seat, is one of five contact points on an upright bicycle, the others being the two pedals and the two handles on the handlebars. The bicycle saddle has been known as such since the bicycle evolved from the draisine, a forerunner of the bicycle.


    What size are saddle rails?

    Non-carbon saddles are typically made with round 7mm rails that fit all standard seat post clamps. Carbon saddles however, are made with an oval rail that measures 7mm wide X 9 mm tall.


    How do you clamp a carbon frame?


    How do you touch up a carbon bike frame?


    Does trek paint frames?

    they will do what they have to do to paint your frame. remove bearings, sandblast, etc.


    How do you remove an aluminum seatpost from a steel frame?


    Why do seatposts have setback?

    Road bikes for years have had posts with setback- a seatpost where the clamping area for the saddle was behind the centre of the post that came up from the seatpost. The theory behind this was to allow for proper weight distribution (ideally 60 % on the rear of the bike, 40 % on the front).


    Can a seatpost be too long?

    As long as the minumum length is inserted into the frame you will be structurally safe. You can buy a shorter post of course. However, if you need to drop the saddle all the way to the frame the bike is likely too large for you and possibly dangerous, as you will have no standover clearance.


    Do carbon seatposts break?

    carbon seatposts not only break from being run very high, but also from being run low, because the flex is in in a smaller area, i had an easton post do this.It wasn't a catastrophic failure just a crack. I'd leave the carbon posts on the road bike and stick with a 7075 or 7005 mtb post, two bolt.


    How do you tighten a carbon seatpost without a torque wrench?

    As for torquing without a torque wrench, hold the allen key with one finger and use your whole arm movement to tighten the bolt. When the finger holding the allen key begins to extend under the tension, it's torqued adequately.


    How many nm does it take to tighten a carbon seatpost?

    Got Tourqe ?

    Bottom Bracket
    300-360 lb/in (32.9-40.7 Nm)
    carbon fiber seatpost 65-80 lb/in (7.3-9 Nm)
    new Madone seatmast clamp bolts 44-61- lb/in (5-7 Nm)
    Equinox hidden binder 65-80 lb/in (7.3-9 Nm)

    Was this post helpful?

    Leave a Reply

    Your email address will not be published.