• September 26, 2022

How Do I Reset My Service Airbag Light?

How do I reset my service airbag light?

  • Put the key into the ignition and turn the switch to the "on" position.
  • Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.
  • Repeat Steps 1 and 2 two more times.
  • What does it mean when your truck says service airbag?

    The service airbag light comes on to indicate there's a problem with a vehicle's airbag system. A problem with the airbag system also means, should there be an accident, the airbags will not be able to properly deploy or may not deploy at all. So in that case a service airbag light coming on is a serious issue.

    How do you reset the airbag light on a 2005 Chevy Silverado?

    Turn on the scan tool and select "Air Bag" from the main menu. Select the "codes" menu, then select "clear all codes." Unplug the scan tool from the vehicle. Start up the engine and check to make sure that the air bag light is no longer on. The air bag system is now reset.

    What do you do when your service airbag light comes on?

    The best thing to do if your airbag light has come on is to take the vehicle to a mechanic right away. A mechanic can help you to deal with the airbag light by examining the system with the help of the car diagnostic internal system.

    How do I turn my airbag light off?

  • Turn on the ignition switch with your car key.
  • Wait for the airbag warning light to turn off.
  • Turn the ignition switch of your car back off for a little longer than three seconds.
  • Repeat steps 1 through 3 twice to make three times total.

  • Related faq for How Do I Reset My Service Airbag Light?


    What can cause the service airbag light to come on?

    What causes the airbag light to come on?

  • The airbag needs resetting.
  • Corroded sensors.
  • Depleted battery.
  • Dislodged wiring.
  • Faulty seat belt.
  • Your airbag clock spring may need replacing.

  • How much does it cost to reset the airbag light?

    Number 1 -- Reset Airbag Light

    You'll need to hire a professional to come in and examine the airbags before you continue to drive the car. This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.


    How do you change the airbag sensor on a 2005 Chevy Silverado?


    Where is the airbag sensor located on a 2006 Chevy Silverado?


    Can a bad battery cause airbag light to come on?

    A bad battery will affect he voltage regulator and alternator. The alternator is now working harder to charge something that can't be charged. A bad airbag sensor will cause your airbag light to turn on.


    What happens if you remove airbag fuse?

    Every vehicle I've worked on has had an airbag fuse you can remove from the fuse panel to fully disable the airbag; the repair manuals recommend pulling this fuse when doing any work in the dash area since there's some risk of triggering the airbags to go off while you're working, which could result in serious injury


    Can an airbag light be turned off?

    Can an airbag warning light turn itself off? An airbag warning light can not turn itself off and has to be manually reset. When an airbag light comes on, there is something wrong with the airbag system. It could be a malfunctioning airbag, a faulty sensor, or just a slight technical issue.


    Can a car fail inspection for airbag light?

    There is no criteria in the inspection regulations that requires the Supplemental Restraint System or airbag be in proper working order for annual safety inspection. Therefore a vehicle does not fail inspection for having an air bag warning light illuminated or even for having an air bag removed.


    Will an OBD2 Scanner Read airbag codes?

    OBD2 scanner can read fault car code and reset SRS. It diagnoses the car's system and hits up with a trouble code that defines what the problem is. However, you need to buy an OBD2 scanner that is capable of reading SRS light codes and resetting it. There are many OBD2 scanners on the market.


    Can I remove airbag fuse?

    you can't remove a fuse to disable the airbag, even if it had one which it doesn't, it still wouldn't disable it. cutting the wires won't disable it either, twisting them, altering the impedence, nope, its a fail safe device afterall.


    Where is the airbag sensor located on a 2005 Chevy Silverado?

    The 2005 Chevy Silverado's front airbag sensors should be mounted on the bottom of the front radiator supports. A sensor will be bolted to either side of the core and removeable after releasing a metal protective shield.


    Where is the airbag sensor on a 2007 Chevy Silverado?


    Was this post helpful?

    Leave a Reply

    Your email address will not be published.